Armorkrystal 600 Plus
4TH GENERATION CRYSTALLINE INTEGRAL
WATERPROOFING ADMIXTURE
Product Description
ARMOKRYSTAL 600 PLUS – is a 4th generation powder crystalline Integral waterproofing admixture designed to resist hydrostatic pressure and for all concrete requiring primary waterproofing. The innovative crystalline technology within ARMORKRYSTAL
600 PLUS reacts with moisture silicate and free lime, a natural by-product of the cement hydration process. This 4th generation crystalline is not only hydrophilic but has
hydrophobic properties as well. The reaction creates millions of nano-crystal which grow throughout the concrete pores and capillary tract. Thus the concrete becomes permanently sealed against the penetration of water or liquids from any direction. The concrete is protected from deterioration due to harsh environmental conditions.
ARMORKRYSTAL 600 PLUS has been specifically formulated to meet the different
temperature and climate conditions.
Armorsil West Africa® is at the forefront of building science, with the best Crystalline Waterproofing in Nigeria, Crystalline Waterproofing in Lagos, and Crystalline Waterproofing in Abuja, such as Armorkrystal 400, Armorkrystal 500 and Armorkrystal 600 plus
- Extremely resistant to hydrostatic pressure
from both negative and positive side of the
slab - Increases freeze thaw resistance of the
concrete - Becomes an integral part of the concrete.
- Highly resistant to aggressive chemicals and
protect reinforcement against corrosion. - Non-toxic (NSF 61 certified for potable water
applications) - Negligible effect on slump, air entrainment,
plasticizers and water reducers. - Permeability tested as per ACE (Army corps of
Engineers) - Allows concrete to breathe and can seal
hairline crack up to 0.4mm
Dosage Rate: 0.8-1% by weight of cement.
Consult with ARMORSIL’s Technical Department
for assistance in verifying the appropriate
dosage rate and for further information
regarding enhanced chemical resistance and
optimum concrete performance for your project.
it should be added to the mixing water
Mixing: ARMORKRYSTAL 600 must be added to
the concrete at the time of batching.
0.5kg, 20 pieces in a pack.
12 months stored in a cool dry place.
ARMORKRYSYAL 600 can be used for the
structural waterproofing of all concrete
structures such as:
- Reservoirs
- Sewage and Water Treatment Plants
- Foundation and retaining Wall
- Underground Vaults
- Secondary Containment Structures
- Tunnels and Subway Systems
- Swimming Pool
- Concrete Slabs and Precast panels
Armorsil provides detailed method statements
on all its products for use in various applications.
Below is an information summary for guidance
The setting time of concrete is affected by the
chemical and physical composition of
ingredients, temperature of the concrete and
climatic conditions. ARMORKRYSTAL 600 PLUS
will have little or no effect on the set time.
However concrete with ARMORKRYSTAL 600
PLUS may deliver higher compressive strength
than normal concrete
Conforms to the requirements of BS EN 934-2
Table 9
Appearance: White
Like all material that contains Portland cement,
this material must be handled professionally as
it can cause irritation and burns. Therefore
contact with skin and eyes must be avoided.
All recommendations, statements and technical data herein are based on tests we believe to be reliable and correct, but
accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either expressed or
implied. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. Nothing contained in any supplied materials relieves the user of the obligation to read and follow the warnings and instruction for each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away. Armorsil Manufacturing supplies products that comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price. Armorsil Manufacturing does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to Armorsil Manufacturing in writing within seven working days of being detected. Armorsil Manufacturing. Makes no warranty as to merchantability or fitness for a particular purpose and this warranty is in lieu of all other warranties express or implied. Neither seller nor Armorsil Manufacturing shall be liable to the buyer or any third person for any injury, loss or damages of any sort including remote or consequential damages, down time, or delay directly or indirectly resulting from use of or inability to use the product. . The information contained in the latest data sheet supersedes all previously published editions. Visits to site by Armorsil personnel do not constitute supervisory responsibility. Armorsil reserves the right to alter the information contained in this datasheet without prior notice
